-
Hello! In accordance with the instructions, I downloaded Espruino to my ATS-100, successfully downloaded all the necessary Java scripts using WebIDE, but for some reason the program cannot start. "Loa…
-
The following fixes are needed on the RDX-rp2040 (Si473X chipset based) board.
- Pull-up resistor from pin 3 of Si5351 (SDA) to +3.3V.
- Pull-up resistor from pin 4 of Si5351 (SCL) to +3.3V.
- Ad…
-
Hello phdlee,
I discovered your firmware here on github almost by chance. since I have a k5 dedicated to testing and a si4732 in the drawer, I'll try to put it in place of the original chip! I just h…
-
Hi.
Problem exporting logfile.
On RDX-rp2040_User_Setup.h line 28 is activated, firmware recompiled and uploaded to the RDX but still not possible to obtain the logfile.
1. USB icon accepts the t…
-
Webtools / Webserver does no work.
#define WEBTOOLS is uncommented in the rdx_rp2040_user_setup.h and UP/DOWN buttons are pressed during restart but nothing happens.
I can see on the monitor that…
-
**Describe the bug**
How and with what command can I high and low the si4735 GPO1 PIN?
-
I assembled a receiver with a SI4732A10 chip. I connected a separate headphone amplifier to each of the pins 1 and 16 on the chip. The amplifier is tested and each channel works separately. But on the…
-
i've been trying to update my generic ats-20 receiver but seems like you used to have patch_ssb_compressed.h inside the examples subfolders and now i only see one in root of the repo. i tried copying …
-
Hi.
I've tried to compile your sketch for a ESP32 Lilygo but I get several errors:
>Arduino:1.8.19 (Windows 10), Scheda:"NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, Disabled (new aborts on oom), …
-
Hi,
I got thoses compilation errors... Thanks.
Arduino : 1.8.16 (Windows 7), Carte : "ESP32 Dev Module, Disabled, Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS), 240MHz (WiFi/BT), QIO, 80MHz, …