-
Hi @catalinii (et all),
Based on the issue #1174 I done this "simple" test:
- Chaining a minisatip instance with two remote tuners (minisatip as well) connected to the same wire.
- Run the "clien…
-
### Description
Hello All,
SPI Slave example stopped work after commit 761ee819568a52f1934ccf17bae20fe9816ebdec. @yamt do you have any idea why its happen?
I am running in esp32c6 mcu, spi exa…
-
Are there any plans for I2C slave driver? I only found embassy example for I2C slave for rp2040 https://github.com/embassy-rs/embassy/blob/main/examples/rp/src/bin/i2c_slave.rs
Checked the i2c driver…
-
Starting from I2S slave, I've written a TDM slave implementation.
It still doesn't support sync_len!=1 and offset !=0.
It has been tested for 2, 4 and 8 channels.
[tdm_slave_impl.h.txt](https://gith…
-
Dear Foxbms Team,
We are applying 14 cell voltages in slave cards MC33775A.
TPL low signal applied as an input signals through interface MC33664A in Pin no 45 and 46. but **TPL High as an output do …
-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate
- [X] Read the documentation to confirm the issue is not addressed there and your configuration is s…
-
I'm attempting to get the device programmed in ESP-IDF and I can't find the value of CST226SE_SLAVE_ADDRESS. Let alone I can't find any documentation on CST226SE touch controller
-
Gibt es die Möglichkeit 2 Wechselrichter einzubinden wenn man die Konstellation im Master und Slave hat?
-
Can someone post a example of how to use the I2C Peripheral as a I2C Slave driven by Interrupts instead of polling?
-
### What happened?
I have 3 usb DACs set up with their own output in my alsa config:
```
pcm_slave.outs1 {
pcm "hw:usbAudio1"
rate 44100
channels 2
}
pcm_slave.outs2 …