-
https://forum.snapmaker.com/t/working-camera-capture-with-lightburn/28397/21
-
The only way of powering off the snapmaker machine is by turning off the button on the power module. I don't know if this makes any damage to the software, to instantly power off the machine, it could…
-
After recent firmware upgrade to Snapmaker2_V1.14.3_20220617, 3d printing calibration data are being lost on reboot. Here is console output when we calibrate machine, then enter M501, M503 and them M1…
-
It's a shame that such great hardware just gets abandonded by snap maker. That's more or less 1000 bucks spent on a paperweight. Great work, thank you. Never again.
-
My SM 2 stops after printing the first layer, Z axis goes to top and and stops, won't Resume printing, I have installed latest firmware and updated Luban to the latest version..
What is the problem?
-
The build plate temperature is 80 when it has been set to 105 in Cura.
-
1. Slice in Cura with Snapmaker PLA on left extruder, Snapmaker ASA on right extruder. Right extruder is **disabled** in Cura for this print.
2. Send file to printer
3. Select file on printer's touc…
-
They fast.inst.cfg file is not imported. Cura says it is not compatible with the selected printer being the snapmaker 350
-
Hi, it would be great to add the Snapmaker to a hidden network. In the moment you can only connect to network that is displayed on the screen.
-
https://github.com/macdylan/3dp-configs/blob/61e20e9a56681def4d6c4bb0643f4dbc827cf7e6/PrusaSlicer/Snapmaker.ini#L3398
I would have a few question regarding to the A350 startup code:
- Why the head…