-
I have a HYD-4600-ES, and couldn't found a 5V pin to power the microcontroller from the inverter.
![image](https://user-images.githubusercontent.com/12583019/177313017-225ef841-8ca3-44d1-9586-34268…
-
Is it possible or will it be possible to write to the inverters modbus registers?
I want to be able to write to: 212 - BATT CHARGE LIMIT CURRENT
Is this in theory possible over the used TCP connec…
-
Hello,
I am getting an error since today.
I got a state "Emergency Error" on the Sofar state and I was not able to write anything anymore. Seems there was temporary a low frequency statement but t…
-
hi,
using this command line : python3 sofar2mqtt-v2.py --broker 192.168.10.231 --config-file sofar-hyd-ep.json --device /dev/ttyUSB0 --retry 5 --daemon
i get the following result :
2024-03…
-
I've just upgraded my inverter to Sofar HYD, and keen to have BatPred running for it. What would it take to have BatPred run this inverter as well?
To control the inverter, the best way seems to be…
-
Using the example from the setup guide and running
` sudo docker run --name sofar2mqtt -e MQTT_HOST=x.x.x.x -e MQTT_PORT=1883 -e USERNAME=mqtt_user -e PASSWORD=xxxxxx -e CONFIG_FILE=sofar-hyd-ep.jso…
-
Dear Author
My parents live in South Africa and face a lot of power outages roughly 2 per day. Is it possible to setup the raspberry pi to control the inverter to allow the battery to stay charged…
-
```
2023-11-28 19:46:13.096 WARNING (SyncWorker_3) [custom_components.solarman.solarman] Querying [512 - 597] failed with exception [CRCError: CRC validation failed.]
2023-11-28 19:46:13.595 WARNING…
-
hi the node red flow funtion node does not seem to act on any of the payload values
i have a debug node on what goes in and one on the output and they both show the same data it does not seem to …
-
I have upgraded to 2.0b1 and found it more stable - I think -
However, when I thought everything was sorted I'm getting one of those dreaded "CRC-FAULT"errors
So things are still not completely fix…