-
And systemcalc.
including here:
-
There are a number of places where gui-v2 pushes device-setting pages based on service type. For example:
- Device List page
- Inverter/charger widget and InverterChargerListPage
- Battery widget…
-
I have a Smart Shunt connected via Bluetooth to a Smart Solar MPPT 250/60 which is connected by a USB VE-Direct cable and a Raspberry Pi running Venus. There's also a RS Smart Inverter. The Smart Shun…
-
Right now, on the side panel on the brief page, there is a bar graph shown on the right of that 926W. It shows the X days, and the data is coming from solar chargers.
And for systems with PV Invert…
-
**### Is your feature request related to a problem? Please describe.**
The way it is now, you have to wire a Victron Charger to the DTU in order to get its values for PV power production and to be …
-
At some public chargers (particularly ones by Alfen), the car can communicate with the charging station to give details about it's SOC, this is shown on the charger display. Looking around the interne…
-
Hi Dan,
I wonder if it's possible to get the sample code running on ESP32s
Swapping out the ESP8266WiFi.h for the regular WiFi.h library is the one obvious change.
But I can't work out how to get…
-
I have a few qestions about this PIP 2424:
1. how can set Solar Charge priority:PCP00,PCP01,PCP02.PCP03?
2. how to send other command(change bulk and float voltage,ecc,ecc)?? before using MQTT was…
-
Lately the script starts every morning as planned. Sets the charging amps at 5 but as it’s winter there’s no sun. The script doesn’t change the amps and quits, but leaves the car charging at 5A.
Is t…
-
### What happened?
Using two of these devices to test them out:
https://www.zigbee2mqtt.io/devices/AM43-0.45_40-ES-EB.html
Working good except that they show up as electricity powered, while they…