-
Greetings,
Is it possible to back up the data on an external server so as to always be able to maintain the historicity of the data?
Best regards
-
Hi I have a Daly BMS 12v 4S 100amp device. And I have a daly usb-mon (meaning it has the 3 pin monitor connector rather than the 5 pin Uart) serial converter. It works fine with the win10 Daly Sinow…
-
Hi,
I am using this successfully on on Axpert 5KVA, but not getting any data from another on the same hardware. I ran the debug and am getting the following:
Thu Jun 25 13:24:54 2020 INVERTER: D…
-
Hi,
I tried with a 24v inverter from easun which however is identical to the 2424MSE1 of MPP solar looking at the esphome log I see that it sends something but receives nothing I also checked the wir…
-
Hello
I've managed to connect to my Voltronic 7.2, but then it doesn't seem to pull telemetry from the second Mppt. For some reason it also doesn't display the Watt output for the Mppt it does disp…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Used Hardware?
Wemos D1 Mini
### What happened?
1. PV-Volt wird falsch angezeigt.
2. PV-Volt und …
-
QPIGS is sent over MQTT and QPIGS2 is not.
-
### Is your feature request related to a problem? Please describe
Add another interval for polling only some few values with a higher interval, that can be chosen, if the load is too high for pulling…
-
I recently changed from axpert to Deye and was wondering if this can be included as well. The operating principle for Deye should work for other variants like Sunsynk and Sol-Ark
-
Hi,
New to Solpiplog. Please how can I install on Raspberry Pi4 running OS Debian version: 11 (bullseye) without using the Solpiplog image.
Thank you.