-
This library was probably written before the new SPI transactions protocol was published, but without that protocol, this library only works if the display (in my case, the ILI9341) is the only hardwa…
-
Add ITS devices for:
- SPI
- I2C
- Digital IO
Also corresponding PDP-10 IO bus devices.
Host hardware would typically be Rasperry Pi devices.
-
15. API - SPI Devices states
"The gpiozero library provides two SPI implementations:
…
A hardware based implementation. This is only available when the SPI kernel module is loaded, and the Py…
-
I use the AVRISP protocol. But for some reason the SPI_CMD_GET_BAUD does not work.
I do not get a valid response. I tried with SNAP and a curiosity 168 board.
this is the test code
command = bytear…
-
Two device tree overlays cannot specify chip-select pins on a single SPI device.
For example, if a board revision introduces a device on an SPI bus, and then a shield also introduces a device on th…
-
Unless I completely misunderstand the idea , do you think it would be possible to integrate the BBS with standalone raspberry pi based Meshtastic node? Based on the Meshtastic info the Pi nodes are te…
-
This is a followup on #8642
If a method was provided to detect if the bus was already initialized a decision could be made on calling `spi_bus_free` before reinitializing. In my situation I have a d…
-
### Link
https://www.iskydance.com/index.php?c=product_show&a=index&id=2433
### Database entry
{"id":4,"type":"Router","ieeeAddr":"0xa4c138cf01f4c3b4","nwkAddr":21421,"manufId":4417,"manufName":"_T…
-
Suppress the warning about not having SPI pins enabled in cases where we are using some other hardware mechanism, like the RMT or I2S devices on the ESP32.
-
### Category
Other
### Hardware
Linux Native
### Firmware Version
2.5.6.d55c08d
### Description
meshtasticd_2.5.6.d55c08d_arm64.deb
mestatic-2.5.3
raspberry pi 3b+ with bookworm
SPI Hat with…