-
Hi, I have this error when running the script, what is caused by ?
the sensor turned on, however no output
![asdf](https://user-images.githubusercontent.com/71395284/106378778-c1ba1300-63c0-11e…
-
Hi,
I was going through the documentation and there it was mentioned that we can callibrate the sensor bu adding SpO2 and BPT values in the algorithm-mode.ino file but in the source code no such file…
-
Could you please explain to us, how you derived this equation from the calibration curve in the document AN1525 (Pulse Oximeter Design Using Microchip’s Analog Devices and dsPIC® Digital Signal Con…
-
Hi. I have this sensor and it is great in terms of pressure and HR. But oxygen gives a constant value of 100 for everyone (I tried five different people). Does anyone know how to adjust this?
-
Program Example8_SPO2 compiled successfully and got uploaded to Wemos D1 Mini.
Board I'm using MAX30102. Wire connection is as below:
WeMos D1 -> MAX30102
5V Vin
G Gnd
D1 …
-
### Troubleshooting checklist
- [# ] I read the README (on master) thoroughly
- [ #] I ran the MAX30100_Tester and I'm going to paste the output down below
- [ #] I filled in all the details of m…
-
Is there any python library available for this sensor?
-
We need the following alarms for HFNC mode:
- [ ] Low O2 supply pressure: the pressure after the pressure regulator on the O2 gas input from the wall is below the ventilator's specifications.
- […
-
@oxullo
Connections :
Vin => arduino 3. 3v
Scl => ardunio Scl
Sda=>ardunio sda
Int=> ardunio pin 2
Gnd=> arduino gnd
_Originally posted by @mesutsaygioglu in https://github.com/oxullo/Ard…
-
Hello,
First of all I would like to congratulate for the excellent job you did. I developed myself a version of "tinyPulsePPG" with MAX30105 sensor using you project as reference . Thank you.
Now…