-
### Description
Upgrade the srsRAN_4G dependency to the latest main branch of the origin repository
-
Dear community,
I have been able to test the srsRAN project with the oran-sc-ric. The KPM xApps work fine. I am trying to check the functionality of the control xApps likes simple_xApp.py. This xApp …
-
## Issue Description ##
I tried to compile srsRAN, but the make got error. Need help please.
## Setup Details ##
I tried to build srsRAN, I respected all the steps which is described here …
-
Hello All,
Currently we are trying to deploy a physical setup:
1. Samsung S21 Ultra as UE
2. SRSRAN as gNB
3. free5gc as a core network
When we try to connect the UE we faced the following …
-
**### Issue Description**
I have successfully installed RF front end drivers such as UHD 3.15 for detection of USRP X310 on virtual machine having OS Ubuntu and after it, I want to install open sou…
-
As with https://github.com/xmikos/soapy_power, support for setting a LNB LO frequency would be useful.
e.g. for https://github.com/srsran/srsRAN_4G/issues/1319
-
When I ran srsenb, I encountered the following warning and the srsenb cannot start.
[WARNING] [MULTI_USRP] Could not set RX rate to 11.520 MHz. Actual rate is 11.703 MHz
[WARNING] [0/DDC#0] The re…
-
## Issue Description ##
when using RLC configuration in QCI=9 { AM::Acknowledged mode} specifically main parameter : SN length and set it to 12 instead of the default 18; the DL physical layer …
-
## Issue Description ##
When running the GNB and UE, an RRC connection is established, but it works sporadically. There is always no PDU session established, therefore no ip address is assigned t…
-
![POZA](https://github.com/srsran/srsRAN_4G/assets/125991526/67390dc7-7039-4ac6-9a16-e3d79b20085d)
## Issue Description ##
I am encountering a persistent issue while attempting to run srsenb with a …