-
I'm working on some risc-v based board with a st7789 display.
The display driver provides the possibility to change the orientation in one of 4 modes: Landscape, LandscapeSwapped, Portrait, PortraitS…
-
Hi,
I recently saw this waveshare 2" IPS screen https://www.waveshare.com/2inch-lcd-module.htm
It looks very similar to the adafruit 2" IPS screen https://www.adafruit.com/product/4311
except t…
-
Hi,
It was not so easy to install, but after a struggle, I made it to compile and upload the factory example (I had to change the factory. ino to factory. ino.cpp).
Anyway, two hours after searc…
-
I am fairly new to MicroPython/Python but have been programming in several languages for years.
Device:
Lilygo ESP32 TTGO with T-Display (on-board display)
firmware with ST7789 driver(s)
https…
-
A description of the problem and the conditions that cause it to occur
I can't make TFT eSPI to work with ESP32 C3 Super Mini with GC9A01 display. The same HW setup works with Adafruit GC9A01 library…
-
I am trying to use this library with Waveshare 1.69 inch lcd module (240x280).https://www.waveshare.com/1.69inch-lcd-module.htm
Board : Esp32 S3 DevKit C-1 N16R8
Unlike the previous display modules …
-
Hi,
It seems that scrolling is not working on my adapted driver, or I do not understand how it should work.
Can you explain to me what scrolling should do? Does oled.vscsad(scroll) move the comple…
-
您好,我看到readme.MD文件中有如下方法:
st7789.ST7789(d7, d6, d5, d4, d3, d2, d1, d0, wr, rd, width, height, dc, reset, cs, backlight, rotations, rotation, color_order, inversion, options, buffer_size)
我想问一下,我…
-
Using a TTGO T-Display (and having activated that option in TFT-eSPI), I got a display problem: only part of the display is used, and with the wrong rotation. I tried changing it without success (only…
-
Hi!
I'm using your crate to drive a Waveshare 1.14in LCD module (240x135 65kRGB) (board with ST7789) connected an RPi Pico. So far everything works, except the pixel origin 0,0 is offset by -40,-53…