-
Hoping you have some pointers for me here. I'm using the DIY kit that uses the STC 15F204EA chip and I'm using Adafruit's FTDI Friend cable in its default configuration which simply emulates a USB-to…
-
noticing when I use protocol=auto, that it does not seem to work with stc15f204ea, but if I specify protocol stc15a, it will work.
```
jens@spire:~/build/stc_diyclock$ stcgal/stcgal.py -p /dev/tty…
-
I see some bits in the code that mention the 404 but how do I specify it to write the eeprom? I flashed your precompiled main.hex and I'm flashing 1f:7f
-
The PCBs have non populated space for a diode, terminal block and 5v relay (not sure which type fits but it's a six pin model). I wonder if this is supported by the original firmware and what it does.…
ghost updated
6 years ago
-
please can you or any other people suggest some windows software to compile and flash ??
a little how to for windows users would be nice too :+1:
many thanks for your work!
-
I purchased http://www.ebay.com/itm/152077409965 and on a whim decided to load this firmware onto it, which has turned out badly for the device.
I can't find a datasheet for this processor, so this m…
hachi updated
7 years ago
-
Opening an issue here to document, as I would much prefer to using native python solution for programming as opposed to the stc-isp in wine.
stcgal seems like it is programming but the program never …
-
Hi!
Seems that stc15f104w is different than a standard stc15.
Did some effort to figure it out... but I failed!
status_packet is one byte too short
##
#### stcgal -p /dev/ttyUSB0 -D -P stc15 binary.…
-
Hi,
just want to report a successful read with the latest version as of now and a STC15L2K16S2:
```
./stcgal.py -P stc15 -p /dev/ttyAMA0 -D
Waiting for MCU, please cycle power: Packet data: 46 B9 …