-
支持stc89c52系列
ghost updated
5 years ago
-
There are some more advanced things im trying to do with my project which don't seem to be working
E.g.,
for one of my projects, I have some very special (don't ask why ;) CFLAGS and LINKFLAGS, wh…
-
I'm starting a new platform, and am trying to write my `board.json`.
I observed that arguments starts with `[0-9]+` are missing in pio action command line.
for example,
```
{
"build": [
"extra…
-
```
[Tue Jun 19 23:16:03 2018] Processing stc15w408as (platform: https://github.com/platformio/platform-mcs51.git; board: stc15w408as)
---------------------------------------------------------------…
-
I have a model with the stc15w404as. according to the schematic for my clock here: http://www.diyleyuan.com/jc/1/01-1.html
the buttons should be on the the 3.0 and 3.1.
Also, I can't find any …
-
The PCBs have non populated space for a diode, terminal block and 5v relay (not sure which type fits but it's a six pin model). I wonder if this is supported by the original firmware and what it does.…
ghost updated
6 years ago
-
I have built the clock kit. I am attempting to load the code onto a stc15w408as processor. The code does not operate as expected. I suspect this is due to the use of a 4 digit display block with two r…
-
I see some bits in the code that mention the 404 but how do I specify it to write the eeprom? I flashed your precompiled main.hex and I'm flashing 1f:7f
-
While studying the diagram DIY_LED_Clock_STC15W408AS.pdf I noticed the RxD/TxD on the external pins of P1 are swapped. All diagrams of the clocks that I have seen so far connect the 3rd pin of P1 (nex…
-
I purchased http://www.ebay.com/itm/152077409965 and on a whim decided to load this firmware onto it, which has turned out badly for the device.
I can't find a datasheet for this processor, so this m…
hachi updated
8 years ago