-
How do you build it?
-
The biggest problem moving this effort forward is the lack of an embedded Rust USB stack: https://github.com/rust-embedded/wg/issues/40
There is a port of @mvirkkunen's usb-device ([implemented for…
-
Hi
In File stm32u0xx_hal_rtc.h are the following macros:
**#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__)
#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__)
#define __HAL_RTC_DAYLIGHT_…
-
One of the most important thing for any peripheral driver is to be able to enable the root clock for the peripheral. On STM32's this is done via RCC A[H/P]nBENR registers. It would be nice if the data…
-
通过stm32cubeMX生成的代码找不到i2c和adc收到信号后处理并发送到PWM的相关内容。有没有大佬来指点一下信号处理和伺服控制相关的代码在什么地方?QAQ
-
Hello, I've been working with this lib for a while and been using it to program a STM32F0. We've used all these peripherals successfully:
SPI1
USART1
TIM1
TIM15
We have tried to setup SPI2 fo…
-
Hi,
According to http://www.st.com/st-web-ui/static/active/en/resource/technical/document/reference_manual/DM00031936.pdf, page 553, the IWDG watchdog in STM32F0 parts has a nominal watchdog LSI cloc…
-
-
Hi,
I'm interested in adding Zephyr support for a board based on a STM32F091xC MCU. This board comes with a STM32CubeMX project file detailing the following clock configuration:
![clocks](https:…
-
I've noticed a strange bug in the comparator library for STM32F0, the COMP_CSR register (one 32 bit register common for comparator 1 and 2) is accessed in the library using the following approach
`#d…