-
There should be something wrong with my configurations.
Could you please make a full example, including the initialization of gpios & timers? I'll check mine.
-
If I am reading the code wrong, just close this.
The only place I can find EEPROM_START_ADDRESS to be defined is EEPROM.h. But as I read EEPROM.h, because of the hack of defining MCU_STM32F103RB on…
-
Having problems with flashfloppy on the new Goteks
Working with a Camputers Lynx interface which works fine with a SFRC922D Gotek (with the STM32F105) but fails with a SFRKC30.AT2 or the .AT4.35 Go…
-
-
I started porting tinyuf2 (great project!) to the RISC-V GigaDevice GD32VF103 on the Sipeed Longan Nano Board, which has supposedly the same USB OTG peripheral as the STM32F105/107 or STM32F4s. Flash …
-
I have a BMS (Battery Management System) which broadcasts with a custom CAN protocol.
To display the battery info on a multifunctional display I need a NMEA2000 converter.
For testing I would like t…
-
Hi keirf,
I'm scratching my head. I have three different Goteks (1 SFRKC30AT3 and 2 STM32F105) all flashed to 3.42 in three different DOS 6.22 IBM PCs, that I have modded with rotary+oled+speaker, …
-
https://github.com/dmitrystu/libusb_stm32/blob/343a4740688fc1f036591a2e9cabfac49b2f4540/src/usbd_stm32f105_otgfs.c#L418
is here fall to default normal? if ok, it must be comment here // fall throug…
aneox updated
4 months ago
-
If DFU_SEAL_LEVEL != 0 i recive state(10) = dfuERROR, status(4) = Memory erase function failed.
What i do wrong ?
cpu stm32f103c8
dfu-util -v -d 0483:df11 -D outfile.bin 0x8002000
dfu-util 0…
-
Not sure if this is actually possible - but would be cool to have support for these containers.