-
Hi, Sargis,
I received your email and I thought it might be much better to post it here to introduce uLapack to more developers. Actually, I'm trying to run **uLapack on MCUs**,
As described in …
-
For example, on WB55, pin `PD3` can be `SPI2_SCK` on `AF3` and `SPI2_MISO` on `AF5`.
```
PortD,PD3,,,,SPI2_SCK,,SPI2_MISO,,,,,QUADSPI_BK1_NCS,,,,,EVENTOUT,
```
When we configure a default pin …
jimmo updated
2 years ago
-
Hi,
Is the purpose of the project to use stm32 with CMSIS driver ?
Is the project terminated without finish ?
Thanks
-
I saw that all index variables (e.g. to access action array, nodes, etc) are of type "signed char", so are in the range 0..127. What is the reason for this limitation ? For a big procedure or state ma…
-
Are there any plans for generating board/arch definitions using SVD files? The Rust embedded effort uses a tool called svd2rust to generate type safe memory mappings (I’m not familiar with all the det…
-
**Describe the bug**
When running a simple project that use embassy on an ESP32C3 (a ESP32-C3-DevKit-RUST-1 board to be exact), I get strange error when trying to debug using RTT.
I get different…
-
## Environment
- Module or chip used: ESP32-PICO-D4
- IDF version: v4.0-dev-771-gc9bf3a3b1
## Problem Description
The flush_uarts() function within components/esp32/sleep_modes.c does not h…
-
I ported https://github.com/mmoskal/uf2-stm32f103 to STM32L1xx in the past without any problem.
Now I try the same with STM32L476VGT6 on STM32L476-Discovery board, but it will never enumerate and e…
-
I've been investigating this device for several days and trying to reverse engineer the firmware, here I publish everything I know about it.
The first thing is the hardware, thanks t[o this post in…
-
If DFU_SEAL_LEVEL != 0 i recive state(10) = dfuERROR, status(4) = Memory erase function failed.
What i do wrong ?
cpu stm32f103c8
dfu-util -v -d 0483:df11 -D outfile.bin 0x8002000
dfu-util 0…