-
Hi,
I wanted to flash and program a Sleep# signal from the STM8 with Gapoc_b v2.3.
I tried to find information or examples on how to do this, but I couldn't find anything. My goal is to have the…
-
I bought the smart doorbell:
https://www.dx.com/p/b30-wireless-wi-fi-intercom-video-doorbell-b10-doorbell-receiver-set-2093215#.XJZ9J0Mo-Wg
It is working very well, but it is connecting to a cloud…
-
Trying to write data to the flash or EEPROM of STM8L052C6 results in `Tries exceeded` error message. Writing to option bytes and RAM works fine and so does reading from all memories. I'm using an unof…
-
While searching LoRa modules on the internet, I came accross a 915MHz 30dBm SX1276 based LoRa module (Part No: E32-915T30D) by a company called EByte.
This also has same LoRa chip as that of Expres…
-
I saw you added support for wifi (great!), so I would like to compile the latest version. Till now I didn't succeed.
I tried to compile using Ubuntu 18.0.3 and 14.04.6 (because chaos_calmer is quit…
-
According to, ["STM8AL3xx6/8 STM8Lx5xx4/6 Errata sheet"](https://www.st.com/resource/en/errata_sheet/cd00237242-stm8al31xx-stm8al3lxx-stm8l052c6-stm8l151xx46-and-stm8l152xx46-device-limitations-stmicr…
-
There are several low-density STM8L devices with 8K or less of flash memory that have internal erase/write RAM routines, but which require a single-byte 'patch' to be uploaded. See UM0560 section 3.8.…
-
Reading out and/or verifying data in "UART reply mode" is very slow over 2-wire interface. This is caused by a few ms latency for each byte which must be echoed by the PC. Using a FT232R, reading back…
-
Some applications, e.g. ISR handlers, Flash page write, or STM8L Low-Power-Run Mode require code that doesn't depend on the STM8 eForth core. While coding in assembler or C is possible, it would be gr…
-
Good day!
Thank you for sharing project.
Have you tried to run it on very similar module: E32-433T30D ?
http://www.ebyte.com/en/product-view-news.aspx?id=108
Looks like it also use same STM8L …