-
I've tried running the examples on RAK4631 and they fail to run with the following logs:
```
Finished release [optimized + debuginfo] target(s) in 1.08s
Running `probe-rs run --chip nRF528…
-
Note: The device is using the [RAK2287 Pi HAT](https://docs.rakwireless.com/Product-Categories/WisHat/RAK2287-Pi-HAT/Datasheet/#overview), which uses [RAK2287 concentrator](https://docs.rakwireless.co…
-
Hi @andelf
can you you see if still compiles ?
Looks that the Crates versions are not updated...
Thanks
I am tryng to port to STM32WL55 (LSM110A)
PS: getting error during cargo lorawan…
-
Sir,
Where i define the the BAND SUBMASK to me make the JOIN ?
I am using the AU915...
-
I will try in soon the CLI option to disbord the android and desktop meshtastic app limitation, that presents only the VeryLong_Slow, and others. That, VeryLong_Slow, is the reason that I opened this …
-
### Platform
NRF52, ESP32
### Description
It would be good to have an option for enabling Continuous Wave (CW) Operation at the reduced TX power.
This can be used to check stability of frequency. …
-
I'm having difficulty getting my Seeed WM1302 (based on SX1302) SPI concentrator to start. It is mounted in the Seeed WM1302 Raspberry Pi HAT on a Raspberry Pi 4 (64-bit) running Raspberry Pi OS Lite …
md4k9 updated
4 weeks ago
-
I am using heltec automation LoRa chip for transmitting LoRa packets. Using the LoRa Rx flowgraph in examples, I am not able to rx msgs for SF 5 and 6 . SF 7 to 12 works absolutely fine. Screenshots a…
-
### Problem
When CONFIG_LORAWAN_NVM_SETTINGS=y, [lorawan_start()](https://github.com/zephyrproject-rtos/zephyr/blob/0b220dd6a6d1a4320e07071d1bdc69adcbe6f65b/subsys/lorawan/lorawan.c#L701) calls loraw…
-
I'm using a Raspberry Pi 3B+ board with OpenWRT OS (v23.05.2) and trying to use a Semtech SX1302 LoRa Corecell interface board via USB interface to use them as a LoRa Gateway setup (RPi + Semtech SX13…