-
I could need some help with LoRa communication between an T-Beam SoftRF SX1626 and a T-Beam Mashtastic. I tried to use the transmitter and receiver code from:
https://github.com/Xinyuan-LilyGO/LilyGo…
-
Hi @tapparelj
While working on LoRa decoding closely, I faced an issue pertaining to preamble and sync word.
The issue is that,
Can the LoRa frame be decoded by knowing only the SF and Centre Fre…
-
We have multiple devices using Dorji SX1262T modules. Here is an example of the problem we're seeing.
We'll use an example with 3 devices. Device 1 & 2 are located far apart. Device 1 is broadcasti…
-
My tracker does work but has a small issue with the displayed battery voltage
It's a Lilygo T-Beam V1.1 LORA32 it does have an onboard 18650 battery.
a) when running from the onboard 18650 battery…
-
Hello,
I've been exploring the LoRa APRS Tracker project and find it incredibly useful for ham radio activities. However, I noticed that it lacks support for APRS item mode. This feature would be h…
-
We are trying to send mpu6050 data over lora Sx126x using raspberrypi zerow , in a list of float using struct method.
Error:
```
Traceback (most recent call last):
File "/home/aerosat/Desktop/ma…
-
### Category
Other
### Hardware
DIY
### Firmware Version
2.3.13.83f5ba0
### Description
The MQTT connection configuration on Portduino only works through the Android app, and it continuously co…
-
I have tried using SH1106 Display on My T Beam with SX1268.
T Beam gets into boot loop and sadly does not work.
When trying to choose ssd1306 in code I can see on the display that the software i…
-
According to the spec, LLCC68 support SF5~9 @ 125K BW, SF5~10 @250K BW, SF5~11 @ 500K BW
When I was playing, I found it always failed with code -20 if SF >9 when it was doing initialization.
Looks l…
-
Radiolib has a function to enable or disable Rx Boosted Gain mode as described in SX126x datasheet
section 9.6 (SX1261/2 v2.1, SX1268 v1.1)
\param rxbgm True for Rx Boosted Gain, false f…