-
Investigate querying information from https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface. It'd be nice if lmsensors gives this data already.
-
Per the [SanCloud barometer guide](https://www.sancloud.co.uk/?page_id=610), the metholodogy to read the barometer part of the sensor (LPS331AP) is as follows:
1. Identify the device in `/sys/bus/i…
-
GPIO (Buttons and Switches at DUT), support for one the following interfaces: sysfs, /dev/gpiomem
-
Another sbc-bench try to differentiate SoCs / SoC revisions is [parsing /sys/devices/soc0](https://github.com/ThomasKaiser/sbc-bench/blob/84e251d10bf0a3de02591e9a52431e6f04dc13bf/sbc-bench.sh#L1574-L1…
-
hi i m new to brunch i used to work with fydeos but the touchscreen was awful - now with this my touch screen problem solves
i search all issue but didn't find anything use full
in fydeos we had…
-
```
It would be good to have the core frequencies available through the sysfs
interface. This will be useful for other processes (like system monitors)
to get this info in a standard manner.
There is…
-
mcu-plus-sdk-firmware/am64x/m4f0/am64-mcu-m4f0_0-fw is used in the Linux BSP.
It is not clear which MCU+ SDK (https://github.com/phytec/mcu-plus-sdk) example provides this binary and this is import…
-
```
static ssize_t disable_show(struct kobject *kobj,
struct kobj_attribute *attr, char *buf)
{
struct irq_desc *desc = container_of(kobj, struct irq_de…
-
```
It would be good to have the core frequencies available through the sysfs
interface. This will be useful for other processes (like system monitors)
to get this info in a standard manner.
There is…
-
**Describe the new feature you'd like**
It would be useful if the extension displayed GPU load and memory usage for AMD GPUs.
**Additional context**
I know this gets requested a lot, but in the…