-
Dear Developers,
I successfully compiled the library in VSCode/Platformio and specifically "SoundLevelMeter" example for teensy36 by copying it into project src directory. However when I tweaked th…
-
hi,
I hope this is still with maintenance :)
I got my hands on a rather old Tronxy XY2 Pro with a V5 Mainboard and would like to try out Marlin on this thing.
Following this guide (https://git…
-
Hello @CongducPham sir,
I'm working on the Ping_pong code :
`
#include
// Include the SX1272
#include "SX1272.h"
// IMPORTANT
/////////////////////////////////////////////////////////////…
-
If you update an XBox One controller to the latest firmware, the update will convert the controller to running using BLE.
Microsoft shows a few different ways to do the update, including I believe si…
KurtE updated
9 months ago
-
Hello Thomas,
WiFi access point is working on 192.168.4.1
Connection to WiFi is ok
KBox display shows (1) connected
ping is ok => 64 bytes from 192.168.4.1: icmp_seq=4 ttl=255 time=4.410 ms
B…
-
Are these errors/warnings anything to be concerned about?
sprintf_P(cmd, PSTR("G1F%d"), MMS_TO_MMM(feedrate_mm_s));
^~~~~~~~~
Marlin\src\lcd\dwin\ui_dacai.cpp: In member function 'void UI_S…
-
Hi Mr Pham Cong Duc,
I used Arduino Pro Mini in its 3.3v, 8MHz which connected the HopeRF RFM 92W (Low-cost LoRa Iot Device: A step-by-step tutorial). But when i removed the power led and the board …
-
Hello, I am having the no printer attched issue with my printer. I have an Ender 5 plus with an SKR 3 EZ and a TFT50 V3.0.1. I will provide my configuration.h below but I have followed the manual, and…
-
Issue Type: Bug
I have been trying tirelessly to get a build finished. Every time I hit clean this message pops up and result in success. Then when I try to build the firmware the same text appe…
-
### Describe the problem
Around early June, the arduino/compile-sketches-action (https://github.com/arduino/compile-sketches/) fails for the Teensy core (https://www.pjrc.com/teensy/package_teensy_in…