-
Hello everyone!
Does anyone think it is possible to run esp-link on an ESP32 connected over serial to a Teensy4.1, that can upload a program to the teensy? I know this library works for Arduino and…
-
The core Teensy Audio library supports dynamic audio connections. The Tympan Library does not. We should extend it to support dynamic audio connections.
There are two levels of "dynamic" that we …
-
Hi, thank u for your effort. I write code on teensy4.1 with program memory 7%. With that situation, the flasherx is doing well. But, When i add a little function in code, the teensy 4.1 flashes 8 time…
-
Dear Sir,
1-On your website, you mentioned an example for Teensy4.1. When we follow the sequence of your codes at the beginning, it seems that you defined a macro, named: **TRAIN** and as a result …
-
### CircuitPython version
```python
Adafruit CircuitPython 9.1.0 on 2024-07-10; Teensy 4.0 with IMXRT1062DVJ6A
```
### Code/REPL
```python
import audiobusio
import audiocore
import board
import…
-
Same as the request for the teensy 3, there is a more elaborate Wire library for teensy 4 [Richard-Gemmell/teensy4_i2c/](https://github.com/Richard-Gemmell/teensy4_i2c/) For now it works by just excha…
-
is there a possibility that we have an ethernet connection handler? I am working on a project that uses teensy4 and Wiz850 Ethernet module
-
blink_slow_teensy40.hex did not work with the -s option when programming the Teensy4.0. However, the soft reset works after recompiling the sketch with Arduino 1.8.13.
-
Hello,
I wanted to update my machine from a version from 2021, but when I try to compile the code with Arduino IDE 1.8.13 I get the following Error. I can't flash my Teensy 4.1 Board.
When I disab…
-
I am trying to learn about CAN Bus and the NMEA 2000 standard. I have 2 Teensy 4.1 with two SN65HVD230 Transceivers. I am trying to use the Kave Oy simulator to send data to one of the Teensy4.1 then …