-
## Description
Add RPi tftp boot booting to scale-network automation
## Acceptance Criteria
Be able to build a VM with the necessary config files and packages to tftp boot a number of RPi's.
…
-
Defining a network doesn't support the tftp element.
It's described in http://libvirt.org/formatnetwork.html and looks like
``
The network.xml.erb should be extended to support this.
-
Hello,
I just tried pulling and running the container with an example file. When I tried to `tftp localhost` and `get test.cfg` I just get a timeout.
Apparently the connection from host to por…
-
After updating antares and SDK make a new firmware and write it to esp via tftp, all was ok, esp bootup.
```
Memory Layout:
data : 0x3ffe8000 ~ 0x3ffe8f90, len: 3984
rodata: 0x3ffe8f90 ~ 0x3ffeb4c0,…
-
Хочу вначале поблагодарить автора за большой труд и внимание к деталям.
А также обширную документацию.
Текущая версия:
2.7.2-RELEASE (amd64)
FreeBSD 14.0-CURRENT
Репозиторий не расширял.
Цел…
-
We use Dnsmasq to replay the network boot service (PXE and uEFI network boot), for PXE, the pxelinux.0 works. However, with uEFI, if the secure boot is enabled, it fails. This is due to this issue:
h…
-
**Describe the bug**
tftp client in `start.elf` is broken
**To reproduce**
attempt to network boot a pi3 with the latest firmware, using https://github.com/openSUSE/xinetd and https://github.com/…
-
**Describe the bug**
This is related to this discussion from a while back:
https://github.com/netbootxyz/netboot.xyz/discussions/1133
I have an older client is sending a file name to the TFTP ser…
-
See here: https://github.com/pin/tftp/issues/41
@vpaprots commented:
> If somebody else stumbles upon this, as I did.. mine hung on a large file (~100mb). s.SetBlockSize(65456) appears to have f…
-
I'm getting an error during the TFTP:
Immediately executing TFTP transfer to 192.168.29.1 ...
Connect request failed
The recovery webpage is up and working on 192.168.29.1
Side note: Since my r…