-
-
Design document:
https://github.com/TinWhiskers/fpd-design/wiki/EFD01---Feeder-PCB---Carousel
This replaces the issue at: TinWhiskers/fpd-electronics#2 (which was confusing to have issues in 2 separa…
-
Design document:
https://github.com/TinWhiskers/fpd-design/wiki/ECAM03---Up-Looking-Camera-Board
This replaces the issue at: TinWhiskers/fpd-electronics#2 (which was confusing to have issues in 2 sep…
-
Design document:
https://github.com/TinWhiskers/fpd-design/wiki/ECAM02---End-Effector-PCB-w-USB-pass-through
This replaces the issue at: https://github.com/TinWhiskers/fpd-electronics/issues/1 (which…
-
We are re-designing the motion controller board for the new machine, to get rid of the Arduino and StepStick modules, in favor of something more DFM-friendly.
Design document for EMC03:
https://gith…
-
Create a SCH/PCB for the end effector. All specifications for this SCH / PCB can be found here:
https://github.com/TinWhiskers/fpd-design/wiki/ECAM02---End-Effector-PCB-w-USB-pass-through
-
NOTE: This issue was originally for the heated bed PCB. As the heated bed and up-looking camera PCBs have been combined, this will serve as the open issue for the board.
Design specifications for th…
-
Determine how to do brightness control for ring lights on these two boards (use the same control method for both boards):
- https://github.com/TinWhiskers/fpd-design/wiki/ECAM02---End-Effector-PCB-w-U…
-
- [ ] **Board Dimensions**: Change height from 70mm to 65mm. Split the difference (move LCD and most parts down by 2.5mm). This should end up with the LCD being centered at 32.5mm in 'Y'. Because t…
-
We've 3D printed an adapter for the Juki nozzles, but there is still some work to do:
- [x] The 5mm side needs an M3 set-screw, similar to the CNC0001 piece on the beta kit.
- [x] The 5mm bore should …