-
I have a [LoStik](https://www.crowdsupply.com/ronoth/lostik) and took some time to figure out how to get it to receive disaster-radio messages (and parse them). I figured this might be useful to someo…
-
Hello,
I need the schematic diagram for my T-BEAM (T22 V07 20180711)
Here can I find it?
I've found a few schematics on the net but they seem to be from an older version as some things don't match.…
-
Hi,
I have TTGO T-Beam V1.1 which has SX1262 LoRa module.
The module fails to initialize and isn't supported with the builtin templates.
To make a long story short, here is how to solve it (not ele…
-
Hey,
First of all thank you for this wonderful code, it is the best documented I have found for the T-Beam and is very cleanly written.
This may be more an issue of my understanding rather of TTN …
-
I have this board : [LILYGO TTGO Meshtastic T-Beam V1.1 CH9102F CHIP ESP32 915Mhz WiFi Bluetooth ESP32 GPS NEO-6M SMA 18650 Battery Holder with OLED (868Mhz OLED)](https://www.amazon.com/LILYGO-TTGO-M…
-
This isn't really an issue, more like a documentation snippet which I didn't find anywhere else.
I got 2 ESP32 Wifi Kit 32 boards. Fantastic little boards. One of the projects was to interface with…
-
I want to power the board without the USB.
Should I provide 5V to the "5V" pin?
Should I provide 3.3V to one of the "3V3" pins?
Would any of the above work?
I guess that if I provide 3.3V, the…
-
I have a couple of the 1.0 version of the T-Beam modules. I have been playing around with the code here as a generic sketch and adding additional credential.h folders to hold different credentials fo…
-
In the Arduino IDE, which board I have to select to upload those sketches?
thx
covra updated
4 years ago
-
When attached to the serial monitor, the logs are flooded with a print buffer deprecation error, here is an example of the logs from boot (DevEUI, AppEUI, AppKey & location redacted):
```
rst:0x1 (P…