-
Hi,
may a hint what im doing wrong, following the guides and actually im stuck ;)
base, vuduo4kse with dvb-c / dvb-s setup, tvheadend as satip client
dvb-s /unicable) tuners seems working so …
-
Hi,
is it possible to implement a Parameter for reading the confings from a file?
Example:
> minisatip -c /etc/minisatip/minisatip.conf
minisatip.conf --> https://bpaste.net/show/6f0f1bb66f90
-
### Broken Link
https://linear-423.frequency.stream/mt/studio/423/hls/master/playlist.m3u8
### What happened to the stream?
Not loading
### Notes (optional)
_No response_
### Contributing Guide
…
-
i would like to import a m3u file to my panasonic tv's so i can have on all tv's the same channel order/config.
the file i need to put on the tv must look like this:
```
#EXTM3U
#EXTINF:0,1. Z…
-
Hi @catalinii ,
Finally I've discovered why _in some cases_ the a channel change doesn't work. This appears when using HTTP clients, and not when using the regular SAT>IP commands (PLAY with new tu…
-
Hello everyone,
I have the problem that only the first 8 tuners of my box work. I have a VU+ Duo 4k SE with 2x DVB-S2 FBC. The first 8 frontends work without any problems. But from number 9 onwards…
-
I have 2x6908 and 1x6909x on same server, 6909x get lot of CC errors on multistream channles on 5W, same frequency working without problem with 6908. Driver is latest, convertor is QUAD, mode=0.
…
-
Hi, I have issue watching encrypted channels,
Every time ECM is updated, picture will freeze for half of a second. Anyone can help me here what could be wrong?
FTA channels are running well.
Ser…
-
Bit of a strange bug this, but 11067.5V DVB-S2 on Astra 2G, has been showing a high BER and often fails to lock on.
Other MUXes work fine.
I tried to isolate the problem a little bit, a separate s…
-
Hi
I have two shared tuners 0 and 1. When Master Tuner 0 is busy and I try to tune to a second stream with differend Polarity, then the slave tuner is used. But that is wrong. Here a excerpt from t…