-
The Black Magic Probe has two serial ports, and the interface should be 0 and 2. For example, this is how it shows up under Windows:
```
Compiling serialport v4.5.1-alpha.0 (E:\Code\serialport-…
-
I was looking for an example which will guide me to report panics to the host PC over USB. I count not find one, so I wrote mine. I know it's not good as I am not a professional developer. Still like …
-
In order to get MTP to work in the [DigMicProbeTest](https://github.com/Tympan/Tympan_Sandbox/tree/master/OpenHearing/DigMicProbeTest), I had to set `use_MTP = true`:
https://github.com/Tympan/Tym…
-
Is it possible to output some serial thru the pic to the USB port ? The use of TX and RX (4 and 5) seems dedicated to the AN ports access - that is not echoed thru the pic to the USB (or so it seems)
…
-
Por favor necesito ayuda urgente. Cuando tengo la web cam conectada al puerto usb no me abre el programa para duplicar el móvil pero si la desconecto si me deja, como puedo solucionarlo? por favor exp…
-
I randomly experience permission issues with the USB serial device, despite no changes to the host machine.
I have a udec rule to ensure the user has read/write permission but even that does not e…
-
Is it possible to flash a Pico over the UART pins instead of over the serial USB connection? I have a project that will use several RPI Pico's, each connected over a mux to a controller with their UAR…
-
### Feedback
The instructions for getting esphome installed on an ATOM Echo tell you to install the CH342 driver:
```- In the dialog, select the CH342 driver, install it, then **Try again**.```
T…
-
i install ver 1.0
and config set serial but it is not work
do you know how do i permission to your app ?
1.0 error message :
mcu 'mcu': Unable to open port: [Errno 13] Permission denied: '…
-
I provisioned a CM4 successfully but nothing was added to Completed (or Failed.)
After provisioning one CM4 monitor.sh is empty as if it was first opened.
While provisioning I did see:
Triagi…