-
**Name of Board**
Adafruit FT232H Breakout - General Purpose USB to GPIO, SPI, I2C - USB C & Stemma QT
**Board Architecture (i.e: SAMD51, ESP32-S2, ESP32, ...)**
FT232H
**Hardware URL**
https…
-
## Environment
- Module or chip used: ESP32-S2-WROVER
- IDF version v4.3.1
- Build System: idf.py
- Compiler version xtensa-esp32-elf-gcc (crosstool-NG esp-2021r1) 8.4.0
- Operating System: Wi…
-
If I go to Settings->About System, both "LORA init" and "TF Card" show "FAIL" on a brand new device. how do I fix that?
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
I'm running RatRig V-Core4 500 with a Orbitool board. I keep getting lost communication error. I've tried multiple toolboards, USB pcbs, and cables. I ordered 3 toolboards, so I had 1 for IDEX an…
-
Starting with the example code at: https://randomnerdtutorials.com/lvgl-cheap-yellow-display-esp32-2432s028r/
Using platormIO, I find if you add an include to wire.h and XPT2046_Touchscreen_TT for …
-
I have the ROC-RK3399-PC with Mezzanine. I'm trying to go from the official Libre [u-boot](https://boot.libre.computer/release/roc-rk3399-pc/) 2023.07+ (Oct 13 2023) to the most recent tow-boot but i…
-
### Describe problem solved by the proposed feature
rt_device identity: a master id - device id
```c
struct rt_device
{
[...]
#ifdef RT_USING_DM
rt_uint8_t master_id; …
-
Hi all,
as the documentation of the Earl Grey design in combination with CW310 doesn't provide much detail of using SPI over USB on a lower level, I hope someone here can provide some useful inform…
hstr0 updated
11 months ago
-
There's a product called ESP32-S3-BOX and ESP32-S3-BOX-3 which is a ready developer kit - comes with touch display and exposed PINs. Would make a good base for the project. Don't want to link to the c…