-
**Is your feature request/improvement related to a problem? Please describe.**
Some people don't have a ST-Link or a regular USB-to-UART adapter, but have a e.g. Raspberry Pi Pico, which can be [ea…
-
Hello, just curious if you have/can release any information on debug uart access. For instance i have a Huawei mate 9 kirin960, its muic is fsa9688c. The debug uart is 6. The uart can be muxed thru to…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
Hello, I try to flash my part without success. I use first the chrome interface on my laptop, after connection it's impossible to start flashing :
![Not-Active](https://github.com/atc1441/ATC_MiTher…
-
Add a UART to the FOMU (needs a USB core + UART over USB)
-
**Describe the bug**
When sending usb packets continuously apparently some are dropped.
There are no logs from the usb subsystem that bytes were dropped.
I was testing on a nrf52840dk with the cdc_…
-
I'm not sure if this is possible over the shared USB port, but: When debugging a device with UART output, it would be fantastic if the hs-probe could also be used as a serial adapter via USB.
Is it…
dbrgn updated
3 years ago
-
Add support for 2nd USB CDC class in firmware based around USB HS and Uart1
-
When I setup connection via USB->Rpi 4 it can disconnect random midprint. But when I use UART, everything is working ok. I have tried different usb cables, does not help. It also disconnects until I p…
-
1. BIC recovery update on slot 2
- EID missing after recovery update through uart.
```
root@yosemite4-n:~# sh factory_tool/fw-util.sh slot2 --recovery sd_bic pldm_sd_bic_enable_i3c_e7 u…