-
Seems the genuine D1 mini pro is in short supply, so I had to buy a clone!
The problem is the clone uses CH340 for the USB to Serial whereas the original uses the CP2104. It also has no series resist…
mopac updated
7 months ago
-
Hi. Thanks for sharing. You wouldn't happen to know which pins to use with an Wemos D1 mini (esp8266)?
https://micropython-on-wemos-d1-mini.readthedocs.io/en/latest/setup.html#development-board
…
-
Hi, mcer12
Trying to get the code working at an WEMOS D1 MINI without success unfortunately.
The WEMOS is constantly rebooting with an 1-second interval.
here is a brief serial monitor output:
…
-
I am trying to make my first arduino simple project based on the directions of this video for a gift to my fiancee [url]https://www.youtube.com/watch?v=duiAbLsXZSE&ab_channel=Breaks%27n%27Makes[/url]
…
-
Hi,
I know this is not the proper way to ask such questions but couldn’t find an answer on google.
Does this work with micropython on a wemos d1 Mini or similar?
Hope somebody tried it or has a…
-
Hi @jurriaan do you now of any compatibility issue on D1 mini?
I'm in trouble and can't get the IR working on it, don't know if it is because of limited current on pins or a timer issue (timer 0 is u…
-
# Programming the Wemos S2 Mini with Tasmota: An Easy Guide for ESP32-S2 Devices | Dialedin
Get the most out of your Wemos S2 mini by programming it with Tasmota. This ESP32-S2 based device features …
-
Hi,
I wanna connect my wemos d1 Mini to my Evse wb.
I have to connect tx (gpio5) and rx(gpio4)
Is gnd also needed ?
What’s are the differences between version 1.x.x and version 2.x?
Thanks for yo…
-
Hi!
I downloaded this sketch to my Wemos D1 mini pro V3.0.
It keeps freezing up about 1 second after boot up and gives me this error message in Arduino IDE 1.83:
"rst cause:2, boot mode:(3,6)"
…
-
I've had good success with your BLE libraries on these ESP32 boards: WEMOS LOLIN32 and MH-ET LIVE ESP32DevKit. But I'd like to use the WeMos D1 Mini board for some projects. These BLE libraries won'…