-
We try to get netbird running using Linux yocto for an embedded device (arm64) using Linux kernel 5.4.193 with patches.
The node is connected to the netbird cloud servers, and can see all the peers…
-
After suspend, sometimes WireGuard isn't reconnecting. In log-file is shown:
```
2023-09-18 08:45:06.473 peer(NKrI…arBc) - Sending handshake initiation
2023-09-18 08:45:06.473 peer(NKrI…arBc) - F…
efef updated
5 months ago
-
Summary:
Pretty consistently i see the wireguard interfaces suddenly dropping their IPv6 address, with only the IPv4 address remaining.
So far i've seen it happen completely randomly, but today i …
kimma updated
3 years ago
-
I installed the new version of wireguard. Generated a new Mullvad config on Mullvad's wesite. Then proceeded with this configuration:
```
configure
edit firewall name wgIn
set description 'establ…
-
My VPN provider only allows a fixed number of wireguard connections and I have more machines than they allow.
I would like to set up wireproxy so it connects to my VPN provider (taking up a single …
-
The way the template is built. If you set the wireguard_endpoint host_var to an empty string (meaning that that host shouldn't have an endpoint) the if statements end up with in undesired option.
W…
-
Here is my hardware:
Spectrum passthrough modem
Edgerouter X (Connects on 172.16.16.1 configured on eth4)
TL-SG108E Switch (IP 192.168.1.2)
Linksys Router in Bridge Mode (IP 192.168.1.3)
AmpedAll…
-
When the Netbird client connects to the server, how to fix the UDP port used by the P2P protocol of the backend WireGuard? Because the network environment has firewall restrictions, only designated po…
-
Hello
I have a big wg0.conf file with 30+ peers.
Is there any good way to use WireRest with current configuration and dont broke anything?
Also, I dont use pre-shared key. How to disable it via…
-
**Describe the problem**
Have two hosts (A & B) on two subnets (netA = 172.16.1.0/24 & netB = 172.16.3.0/24), connected to the same firewall and are running the netbird client.
Per the firewall …