-
### Describe the enhancement you're suggesting.
Would like the ability to send and receive files via XModem and its various flavours (original checksum, 1k-block, CRC-16).
Files should be written …
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
The interrupt handler for [BufferedUart](https://github.com/embassy-rs/embassy/blob/9cfcc5b89afb8fee9371af3bfbe8480deb2ef634/embassy-stm32/src/usart/buffered.rs#L17) doesn't clear the idle interrupt f…
-
Hi Tom,
Is there anything that can be stripped out to allow this sketch to fit into the Nano 168 (rather than the 328)? Or would that be unachievable? I only need to program the 28C256 chip, but it…
-
I have worked in 1_Image_BFU for STM32WL55xx and tested it in Linux minicom.
Your sample says it should be used 128B packets to send a firmware file on Linux minicom, but I couldn't see it's working.…
-
![image](https://user-images.githubusercontent.com/61225/162609496-d78dcf25-0739-41a9-b082-f116d83be4ea.png)
but `sb` is actually :
```
thing on git master [x!+?] via nodejs v16.6.1 took 2s
…
-
In the Makefile there is `MICROPY_USE_FATFS` but in `mpconfigport.h `there it is `#ifdef W60X_USE_FATFS`.
I assume both should denote the same. It feels natural to change the mpconfigport-notion? Is …
-
after flashing to ncp-uart-sw_**7.1.1.0**_115200.gbl
I return to ncp-uart-sw_v**6.10.3**_115200.gbl and get this error
```
python3 Elelabs_EzspFwUtility.py flash -f ncp-uart-sw_v6.10.3_115200…
-
Tue 11 Dec 2012 02:42:22 PM CET
Using _crc_ccitt_update() gives the wrong result. You can verify the result by comparing it with known good implementations, e.g. the XMEGA CRC module, the Boost libra…
-
I'm searching for some instructions on using the Linux CLI to upload a dump to the Chameleon
Currently I'm trying this:
I connect with cu to the Chameleon:
`cu -l /dev/ttyACM1 -s 19200`
I th…