-
pip install zcls
没法安装这个库
-
### Question
I need to use on-off cluster (cluster id 6), without using any attribute and to use it as switch and 4 endpoints are registered from 1 to 4. On coordinator side, i am using Home Assistan…
-
### What happened?
When I try to change the position of my roller, I can see the roller move physically, but the position reported by Z2M and consequently by HA is incorrect; it remains unchanged. …
-
I'm trying to run ZAP in the mode where you can run a web server with the GUI mess with the the zcl_config.zap files. I'm having issues with it loading an already existing file to make modifications w…
-
### What happened?
Multiple of my Awox TLSR82xx bulbs are getting frequently/almost constant disconnected as soon as I get them back online by pull from the lamp and bring back despite LQI ~=>100
…
-
### Board
esp32c6
### Device Description
esp32c6 dev module
### Hardware Configuration
no
### Version
v3.0.1
### IDE Name
arduino ide
### Operating System
windows 11
### Flash frequency
8…
-
Directsigns Zigbee 3.0 Controller, often sold by Baushaus.info
PDF: https://www.directsigns.cz/web/content/4784?unique=50c2521e1aa8aa4f5b534ef1cb6c17edf8cc77e8&download=true
modelZigbee:DS-Z-001DE…
-
### Question
Hi, I would like to define a more complex application compared to the examples.
I need to configure three clusters:
- genBasic
- onOff, a switch to control a GPIO pin with a relè
-…
-
When using the PM1006 setup (for IKEA Vindriktning Air Quality Sensor) as shown:
the autogenerated quirk for ZHA needs the following modification to operate correctly
(_PTVO Firmware configurati…
-
### Question
I am trying to setup a battery powered zigbee device/sensor with deep sleep to ensure long battery life. However I am struggling to send a new value to the corrdinator after the device w…