-
Problem:
Es werden nach dem Anlernen des Gerätes keinerlei Events empfangen (https://www.zigbee2mqtt.io/devices/E1744.html).
Bisherige Lögungsversuche:
- Update zigbee-herdsman-converters (keine…
-
Just wanted to say that I successfully flashed the CC2531 USB stick with the TI provided firmware that can be found here: https://github.com/mtornblad/zstack-1.2.2a.44539/tree/master/CC2531
I used …
-
Easy ESP drops TCP connection to the serial server port if there is another connection to that port which times out or gets terminated otherwise.
I have esp8266 with cc2530 zigbee coordinator conn…
-
after updating from an old version (months old) i get the following
Debugger listening on ws://127.0.0.1:9229/a98ab44f-5d85-4806-a7a5-94c64bde0ecb
For help, see: https://nodejs.org/en/docs/inspect…
-
Hello,
When I try to connect some devices ( it happens with both the SmartThings multisensor and the Xiaomi MI Smart Home wireless switch ) I will recieve this error
```
cc-znp:AREQ
-
Hi,
trieing to install npm i will get following error and i cannot find any solution. Thanks for your help
root@raspberrypi:~/xiaomi-zb2mqtt# npm install
npm WARN package.json perfy@1.1.2 No READ…
-
Map works again. However after update 0.11.0 most of the nodes seem like "floating", not connected to any of the routers/coordinator. I also updated to 0.12.0, same behavior.
I even deleted the herds…
-
Bei mir das selbe Problem. Habe hier einen MOES 2 Gang Dimmer; MS-105BZ; Zigbee V1.9.6
Wird aber wie folgt erkannt.
![image](https://github.com/ioBroker/ioBroker.zigbee/assets/703761…
-
So far, all my attempts to manage have not been completely successful. Where can I find out what exactly to send to the topic "mqtt", to control the LED and WS2812 tape.
While I control only the rela…
-
I cannot run the demo on Beaglebone debian 7.9
This is the error:
root@beaglebone:~/Desktop/zigbeer/zigbee-demo# npm start
> zigbee-demo@0.1.0 start /root/Desktop/zigbeer/zigbee-demo
> cross-e…