-
I'm using pimd to route multicast packets across different AWS regions over a GRE tunnel.
I've been able to make everything work but group joins/leave. Capturing some packets shows that AWS does prop…
-
**Description**
1. Try to using tcpdump tools to check packet be forward via Ethernet Port of BFN Wedge100bf_65x
2. tcpdump -i Ethernet0 or tcpdump arp -vnXi Ethernet0 on BFN Wedge100bf_65x
3. To …
-
```
What steps will reproduce the problem?
1. Create a TCP SYN and ACK packets with specific Seq# and ACK#
2. Send the SYN and ACK packets (with or without waiting for the SYN+ACK packet
to arrive)
3…
-
**Describe the bug**
On a live capture, if the filter is invalid, dumpcap exits - however not caught. The library just sits and spins.
In my case, I specified `multicast` on a MacOS loopback inter…
-
I send the same # of packets each time (15000000) and tcpdump reports the correct amount while netsniff-ng reports an extra 2 or 4 packets.
rx: 972.748 MiB 15000000 pkts 0 d…
-
Capture some packets from the mininet automation environment from different points and publish to wiki
-
The good news is that setting the new image for the juicebox_commands branch seemed to work. Also, most of the read values I had before seem to be working. With the EXPERIMENTAL set to true, I see t…
-
#### Description
If we disable/enable Option 79 and interface_id in config_db for ipv6 dhcp_relay, there is no difference in captured dhcp-relay packets on server side
#### Steps to reproduc…
-
Stupid question but how do I stop pcap?
If I set a timeout in pcap.OpenLive, ReadPacketData waits until the timeout (regardless of packets received) and then gives me only the first packet it captu…
-
I've done some tests with AWUS036ACH on Ubuntu 22.04.2/Ubuntu MATE and get to point that NetworkManager is doing something to adapter and breaking the whole system. I've used airodump-ng to see captur…