-
Hello,
I got the ChameleonMini today and tried it on my Notebook which is running Windows 7.
When I connect it via MicroUSB the device manager finds LUFA CDC demo with an exclamation mark. So I down…
Xykon updated
8 years ago
-
For most of my cards "IDENTIFY" doesn't work, even though I see through logging that there's some "good" information coming in. That works only in reader config, right?
-
Using a Samsung galaxy s4 the chameleon is not detected if the config is on MF_DESFIRE.
-
Not sure what's going on, but when I try to read the ChameleonMini with a large key file, MCT often loses connection. With a minimal key file (containing only 1 key of FFFFFFFFFFFF), it succeeds but s…
-
I made a ChameleonMini by myself.
Here is my step to download the firmware:
1. connect the board to PC
2. use avr isp mkii to download the bootloader(RevE-atxmega32a4u_104_modified.hex)
. Maybe it…
-
Hello. I'm ready to print PCB but little confused.
In repository I found only RevE-2 board but here http://www.mikrocontroller.net/topic/327629 people talk about RevE-3.
The main difference is in an…
-
I made a ChameleonMini by your PCB design, and it works well, after I increased the UID, I want downlaod the changed dump file to find the differences between the file and origin file.
But after I se…
-
Recently I tried dump my Mifare Classic 4K card, then emulate by ChameleonMini. So i crack this card using `Proxmark3` , `mfoc` and `Mifare Diagnostic tool`, as the result, i got the dump file as blo…