-
After flashing my MD380 with the latest version, I occasionally have a blank display.
When the display becomes blank (just blue backlight), RX and TX work well.
I cannot reproduce the problem: it hap…
on8vm updated
8 years ago
-
trying browsing contact to send a message the radio reboot
-
I've noticed that if the 380 does not receive any signal for 10 minutes goes into some "power saving" mode that block PTT.
If you press ONLY PTT does not transmit, you have to twist the channel knob b…
-
TYT's official editor for the MD380 issues its codeplugs as `.RDT` files, which are just a thin DFU header applied to the binary codeplug.
Close this issue when `md380-dfu` properly creates and reads…
-
They have a GPS and a non-GPS version. It seems like a MD390GPS with four major differences:
- man down
- 10w
- built-in recorder
- big battery
http://www.radioddity.com/us/radioddity-gd-55-uhf-water…
-
Need to find offset for radio settings in codeplug.
m0ivq updated
8 years ago
-
Do you need/want a virgin codeplug image for an MD380? There's one on a mail truck with my name on it due to arrive tomorrow. If so, let me know what command I need to run and I'll post it.
nivex updated
8 years ago
-
Giorgio reports that the VHF model of the MD380 doesn't like the addition of the CSV to the SPI Flash. Somehow, it is damaging the codeplug.
Assigning to @aeickho, as the CSV database is his contr…
-
If one changes the DMR-ID via utilities - addl. funct. the DMR-ID only stays until power-cycle. Then the original DMR-ID from the codeplug is in use again.
Is this a bug or a feature? Could be both, …
dg9vh updated
8 years ago
-
As previously discussed in #146, hardware that ships with D013.009 is incapable of running earlier firmware. We need to know why, and we need to get our patches running on the new hardware.
Use this…