-
Hope will write new version with support for new features till end of next week. Sorry that I can't answer to all these issues. I'll read them after I end new version, since there are many changes.
-
management gpio registers `reg_gpio_mode1` and `reg_gpio_mode0` don't have an affect in the value of gpio_in_core when floating.
-
A complete road map is needed to design the course. Corresponding books are the best source of truth in this regard.
So In this issue, the books and a brief introduction of them will be listed.
-
THE PROJECT CONTINUES. NOBODY HAS BEEN WORKING ON THE PROJECT SO FAR!
Hey bounty hunters!
I have 2 tasks. Need a ERC721 Contract basically openzeppelin's “opensea-creatures” on github. + website…
-
Is it a stupid idea to use the Adafruit_NeoPixel library instead of FastLed?
I tried to do so, but I failed:
**PiconZero08n.ino**
```
//////////////////////////////////////////////////
//
// P…
-
Thank you for the great tool.
I have a z-axis stepper and a rotary encoder controllable using an Arduino Mega with Marlin firmware. However, when I tried using the Hardware Configuration Wizard, it…
-
### Board:ESP32
### Display:Waveshare Ink 2.13inch/2.9inch
### I modified your 4.2 part of the code and modified some of the pins. When it worked with epaper2in9.py, my display worked perfectly.
!…
-
There was a question on how to make this (brushless) spindle driver work w…
-
Ansible is an agentless automation tool that you install on a control node. From the control node, Ansible manages machines and other devices remotely (by default, over the SSH protocol).
https://d…
-