-
### Description
While the Values in the created mesh are e.g. for the lower left corner 0.08, the value shown in manual leveling with probe is 0.034 low (i assume -0.034, see attached images.)
Th…
-
Hi,
I was using E3V2-UBL-BLTouch-15x15-v4.2.2-v2.0.1.bin. Even after setting the correct Z-offset and double-checking with manually leveling, the nozzle started scraping the bed ([it scraped a good…
-
I tried doing a some test prints and it failed to capture the print job.
I am using Cura 4.13.0 with GCode Preview script from https://github.com/mriscoc/Marlin_Ender3v2/wiki/How-to-generate-a-gcode-…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Enabling Z_PROBE_SERVO_NR leads to a complete crash of the Ender 3 v2. The display is totally…
dwery updated
2 years ago
-
### Application Version
4.12.1
### Platform
windows 10
### Printer
Ender3v2
### Reproduction steps
Tried to open file. Never even get to select file to open. Immediately says - error.
### …
-
Following some of the steps in this issue https://github.com/KevinOConnor/klipper/issues/3549 I was finally able to get my turbo working again, however only adding the standby pins to printer.cfg was …
-
### Description
Perhaps it's a known limitation, but I can't find any info: it seems that on my Ender3V2 running `E3V2-UBL-BLTouch-15x15-v4.2.2-v2.0.1.bin` I have only one UBL mesh slot available?
…
-
This is merely a question/request for help:
I'm using this firmware https://github.com/Jyers/Marlin/releases/download/v2.0.1/E3V2-UBL-BLTouch-15x15-v4.2.2-v2.0.1.bin
with our Ender3 v2 + CR Touch.…
Kirbo updated
2 years ago
-
Hello,
RPI 4, mcu ender3v2.
I want to control GPIO pin using GCODE but looks like rpi GPIO control not working.
What could be the problem?
Thanks.
My simple config:
```
[mcu]
serial: /dev/tt…
-
I want to use BLTouch in the ender3V2 in Klipper , but i don't know the pin number.
This is the picture, thank you .
![image](https://user-images.githubusercontent.com/95208444/143831600-f97580fa-92…