-
I'VE OPEN ON GITHUB LIBRARY ABOUT COMPABILITY WITH ESP8266
I think also spi code is not fully ok , because often esp need many reboot to flash or sometimes both not work correctly.
##
Want to back …
-
Hi, I am trying to make this library work with my Sonos Play 1 Speakers, and I am not sure where things stop.
When I for instance try to run `g_sonos.play(g_sonosLivingrIP);`, this is what `void S…
-
![schermata 2016-05-22 alle 14 51 10](https://cloud.githubusercontent.com/assets/6162152/15454044/e0729e3e-202c-11e6-9437-ced6f8a0d83b.png)
Correct this with ststm32 ?? with right stm32f1 in library.…
-
Hello,
I've read several forum entries about this lib not being compatible with 32bits MCU like the one embeeded with Teensy 3.x.
When migrating from arduino to teensy on my project , I didn't manage …
-
I am trying to use JerryScript on ESP8266 device. This device has around 40K free. My app, without JerryScript compiled in it, has around 35032 bytes free heap. Just by adding JerryScript with CONFIG…
slaff updated
7 years ago
-
Thank you for your great project. I had most of it workning on my wemos.cc when I enter my sonos IP manually, but discoverSonos() didn't work. It kept saying "Sending M-SEARCH multicast" over and over…
-
Hi all,
I woud use the rfid module, but when I compile Sming, I get a lot of error: is there any direction to compile the library ?
I'm usnig Sming 2.1.0 and I put the rfid files (git clone https://g…
-
Hi chaps,
Ive just updated my arduino ide support for the ESP8266 to the latest stable version.
But a previously working program using the sleep timers is now playing up.
Im using an ESP8266-12 on a…
-
I have a short example, where I want to have an OLED display connected to ESP8266 (by I2C)
and also an RFID module (by HSPI)
Cabling is done like this https://github.com/Jorgen-VikingGod/ESP8266-MFRC…
-
How would I go about connecting a second serial device to digital pins? Trying to connect a RDM6300 RFID read but have had no success on the UART (rx/tx) lines in. Maybe some SoftwareSerial exists for…