-
### Discussed in https://github.com/ExpressLRS/ExpressLRS/discussions/2374
Originally posted by **truglodite** August 21, 2023
Now that airport is working, it would be the cherry on top if elr…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### What part of EdgeTX is the focus of this bug?
Transmitter firmware
### Current Behavior
When I power…
-
## Current Behavior
Hi folks, after long time not flying, I updated my BETAFPV Micro TX (1W) to 3.3.2 .. not sure which version was flashed before..
I also updated my BETAFPV Nano RX to the same v…
-
I have upgraded to 1.5.2 and have upgraded all lua folders and flash files. Upon connection I used to see signal bars EXT on top notification bar but it stopped showing now. Tried removing telemetry a…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### What part of EdgeTX is the focus of this bug?
Transmitter firmware
### Current Behavior
With the Zor…
-
## Current Behavior
When measuring the output power of the TX Module with the IRC RF Power Meter V2 (measuring Peak Power not average, @2400MHz) the TX Module appears to output twice the power bein…
-
Pless Elrs v3 update((
-
## Expected Behavior
I want to update the firmware on my DIY 2.4 GHz RX
## Current Behavior
There are no DIY 2.4 GHz RX device targets
## Steps to Reproduce
1. Download and install ExpressLRS…
-
[loglog-3.3.0-1.6.txt](https://github.com/ExpressLRS/ExpressLRS-Configurator/files/13260381/loglog-3.3.0-1.6.txt)
[loglog-3.3.1-1.6.1.txt](https://github.com/ExpressLRS/ExpressLRS-Configurator/file…
-
## Current Behavior
A BetaFPV MicroTX 868Mhz Module in Airport mode is not recoverable via ExpressLRS Configurator.
## Steps to Reproduce
1. Flash module with Firmware 3.3.2 via ExpressLRS Co…