-
Hi @EliasKotlyar ,
First of all, nice work, thank you very much for sharing it with all of us :-)
Is there any way to rotate 90º or 270º the image? I know there is a flip option (180º), but it w…
-
The ingenic-drm driver is a bit specific as it has one overlay plane, and two mutually exclusive primary planes.
Wlroots assumes (and `assert()`) in its code that there is only one primary plane. T…
-
**Logging**
gdb crash log
[Switching to Thread 5754]
0x77afd578 in sctp_findassoc_by_vtag (from=0x60449bd0, to=0x60449bd8, vtag=987373538, inp_p=0x60449b5c, netp=0x60449b60, rport=34835, lport=34…
-
Gdb CRASH:
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 11352]
0x77a5fb54 in pthread_mutex_lock () from target:/lib//libpthread.so.0
(gdb) bt
#0 0x77a5fb54 in pthr…
-
Device type: Camera (WYZECP1_JEF)
Device name: Living Room Cam
Firmware version: 4.10.6.199
IP Address: 192.168.1.227
After getting a series of consistent reboots every few minut…
-
### What happens?
I would like to compile PPSSPP for the RG-350, an Ingenic JZ4770 with a MIPS32r2 core clocked at 1 Ghz (can be overclocked depending on silicon quality up to 1.2 Ghz), a VPU and a…
-
Wyze Cam V2
with open source U-boot
### Description
After flashing CFW1.1, my WyzeCam v2 works fine with custom firmware booting from sd card. However, when I try to go back stock firmware by r…
-
I've recently stumbled across #418 which added support for a device I own, but I couldn't figure out how to flash the rootfs.bin file onto my unit.
The unit I have is unable to boot into its origin…
-
Is possible to install the custom firmware in a iSmartalarm Spot+ camera?
The CPU Info is this:
Processor : ARM926EJ-S rev 5 (v5l)
BogoMIPS : 200.29
Features : swp half fastm…
-
Is possible to install the custom firmware in a iSmartalarm Spot+ camera?
The CPU Info is this:
Processor : ARM926EJ-S rev 5 (v5l)
BogoMIPS : 200.29
Features : swp half fastm…