-
To build OpenOCD for several platforms (Windows, Linux, MacOS), I use the xPack (https://xpack.github.io/) build scripts. The build procedure with xPack for OpenOCD is described here:
https://xpack.g…
-
hello,
I managed to flash your latest release (generic pc13) on a bluepill that already has a 1K5 pullup.
But windows cannot enumerate the device.
It says in the device manager: failure to ask fo…
-
Hi,
I have an Elecrow Crowduino M0 SD and have some issues with uploading a sketch.
Environment:
- Arduino IDE 1.6.11 from arduino.cc
- Arduino SAMD Boards (32-bits ARM Cortex-M0+) 1.6.6 via Boardman…
-
Hello!
I had 2 consoles, I backed up first console, unloked, changed the chip to 64 mb, restored the backup, recorded a bunch of games, everything is fine with this. Did all this in Ubuntu VMware und…
-
Have you considered replacing CC2530 in DIYRuZ Flower sensor design with a new TI CC26xx MCU like the CC2652 series or similar?
Should in theory make the battery last much longer and get better sig…
Hedda updated
2 years ago
-
There's a product called ESP32-S3-BOX and ESP32-S3-BOX-3 which is a ready developer kit - comes with touch display and exposed PINs. Would make a good base for the project. Don't want to link to the c…
-
### Development Kit
ESP32
### Module or chip used
ESP32-WROVER-E
### Debug Adapter
ESP-Prog
### OpenOCD version
v0.12.0-esp32-20240318
### Operating System
Windows
### Us…
-
We currently have some functionality to start `gdb` and run a script that is located outside of the Haskell code. But it would be nice to at least have a reusable function to load a binary onto the FP…
-
A small driver needs to be written to toggle the shunt (R21) in case of regeneration caused by backdrive of the motor controllers. For now, R21 is to be left unpopulated.
CLARIFICATION: The firmwar…
-
It looks like "Programming" is coming up an a future installment, but in the mean time could you comment on what sort of debugger/programmer one would need to be able to program this board? For exampl…