-
Hi Shaoziyang,
Many thank for putting the firmware on github.
I try the firmaware with STM32-Link Utility but the SensorTile did not work.
I extracted the SENSORTILE_board_support.zip into micr…
-
with a pip intall --user, i try several command:
```
$ mpy-fuse /mnt/rom/ --debug
Forcefully breaking the boot.py
Forcefully breaking the boot.py
Forcefully breaking the boot.py
Forcefully break…
-
I try to make some request using urequest module. My website is running on HTTPS ( using letsencrypt certificate ). After ~250 requests I receive
> ssl_handshake_status: -256.
Mycropython versi…
-
Just installed rshell on a raspberry pi and although I can connect to the device using screen, when I run rshell it just prints "looking for hexlify" (or something similar) and then hangs.
That als…
-
**Assess:**
- LED/receiver range -- well lit, darkness
- Accuracy required for hit
- 3D-printed diffuser effectiveness
- Laser brightness for smoke gen
- Simple play-testing
- Prot…
-
This is an improvement request to extend the existing SSH module with (basic) VT100 terminal functionality.
Doing so, would allow seeing and interacting with `ncurses` programs running on the serve…
-
Hi,
I am trying to use the command you provide in the readme to install your package on my esp running on micropython, but cannot.
The command:
python.exe -m mpremote mip install github:mchobby/…
-
I followed every step in the README file, though when I press run to upload the python files I get:
"Connecting to COM4
Uploading files: 0% (0/1)
C:\Projects\MicroPython\ESP32\main.py -> main.py"
…
-
Thanks for the library! I'm going to use to to upgrade an old RC car with an ESP8266 and use this as the controller.
I am getting consistent `OSError: [Errno 19] ENODEV` errors when I use your libr…
-
Consider:
```python
from machine import Pin, PWM
pin = Pin(23, Pin.OUT)
pwm = PWM(pin, freq=38000, duty=338)
```
This works as expected. If you issue **ctrl-d** the waveform on the pin continues…