-
Please answer these questions before submitting your issue. Thanks!
### What version of Python are you using (`python -V`)?
```
Python 2.7.13
```
### What operating system and processor a…
-
I've been using your NMRP tool to try and unbrick a Nighthawk R8000P router with it. Unfortunately, all the firmware file sizes exceed 32mb and I keep getting block rollover issues. Even though it fin…
-
These are requests used by attackers:
1
GET http://18.193.17.141:80/vendor/phpunit/phpunit/src/Util/PHP/eval-stdin.php
2020-10-05 12:53:01.4053|INFO|Microsoft.AspNetCore.StaticFiles.StaticFileMid…
-
Some my users [1](https://eko.one.pl/forum/viewtopic.php?pid=236425#p236425), [2](https://eko.one.pl/forum/viewtopic.php?pid=235531#p235531) reports problem with uhttpd:
`daemon.info procd: Not sta…
-
I have an AT&T device that registers with the & in the name. This causes get_attached_devices to fail with the error:
xml.etree.ElementTree.ParseError: not well-formed (invalid token): line 9, column…
-
```
Mi continua a dare sempre questo errore. Ho disattivato il wireless sul router
pensando che qualcuno dall'esterno tentasse di collegarsi. Sono l'unico PC
collegato al router un NETGEAR DG834Gv3.…
-
Hi
After cloning, when I run the make && make install command, it throws the following error.
/bin/sh: 1: bc: not found
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/5.4.0-kali3-amd64/build …
-
### Describe the bug
国内宽带的IPV6地址是经常变的,一般来说每个星期会变一次
然后openwrt最开始是正常的,WAN口正常获取PD,然后LAN口正常的分配IPV6地址
但是每当电信重新分配IPV6以后
openwrt的WAN口会正常的变更IPV6地址,但是LAN口却不会,然后局域网内的设备就全部没有IPV6地址了
感觉像是openwrt并没有接收新的PD…
-
```
Mi continua a dare sempre questo errore. Ho disattivato il wireless sul router
pensando che qualcuno dall'esterno tentasse di collegarsi. Sono l'unico PC
collegato al router un NETGEAR DG834Gv3.…
-
```
As per wiki [1] and other details it appears that this project can also support
Netgear DG834Gv5, this issue is to request provide firmware for DG834Gv5 and
management application in English lan…