-
Nibe library works fine for me (S2125, TCP modbus)
Nibe-mqtt does not work for me
Environment:
- Raspberry-pi; Raspbian (latest)
- Python 3.9
I get error below:
```
hansij66@pi4:~/temp/nib…
-
**Describe the bug**
nibeuplink.0 | 2023-03-18 06:48:36.175 | error | AxiosError: timeout of 45000ms exceeded
nibeuplink.0 | 2023-03-18 06:48:36.169 | error | error from serviceinfo/categories?par…
-
### The problem
I have a F1255 nibe heatpump. When setting up the nibe heat pump integration, it is detected as a F1155.
I am able to succesfully go throug the setup process and 1 Device + 976 entit…
-
I am trying to install this add-on in the latest version of HA.
Add-on Store -> Repositories -> Manage add-on repositories. Then I enter "https://github.com/elupus/hass_nibe" and click "Add".
Er…
-
I created a flow to collect data from a S1155 heat pump. I only added a few nodes, but after a short period of time exceptions started to appear. The data stoped being collected. Restarting the flow h…
-
The Nibe heating/cooling(nibe-thermostat-0) function shows the current temp of water flow but not the set room temperature. is it possible to add a switch to see the current room temp and the set temp…
-
### The problem
I have 4 eastron sdm energy meters.
1 is working fine, but the other 3 are not communicating with the esp32.
They are connected in parallel over a rs485 bus.
Tried many things wi…
-
### Feedback
The ones to support ModBus TCP are not wroten :( so will be hard for users to understand that supported are also that models:
S2125-8, S2125-12
VMM S320
SMO S40
Also in the menu …
-
### The problem
The sensor for the pool temperature is N/A. if I add it with modbus it works(address 27). In the documentation for the Pool 40 system it is located under CL11-BT51 while in the integr…
-
## Context
A target temperature is a target temperature. If it's set to a range should not matter for support. It's up to the UI to see which one is set and render accordingly.
## Proposal
Re…