-
I can't get my Build-in BT module to work with the Tracker FrskyX Telemetry.
CRC is checked here currently in frskyx.c:
```
if (!checkSportPacket(packet)){
telemetry_failed_cs++;
return…
-
anyone can help me?
I am using:
betaflight + fport R9mm
X9D + R9M ACCESS - S.PORT + GND pins used
esp32 dev board
#define ESP32_Variant 1
OLED display GND, 5V, SDA - PIN 21, SCL - PI…
-
Well, I already found someone that had the same proble, and I also had it with my preovious radio once. https://github.com/iNavFlight/LuaTelemetry/issues/395#issue-659823054
### Describe the bug
T…
-
Could you check if this is indeed the case?
On X10S Express and Jumper T16 no problem, when I try on X12S I have this error.
-
I have just received my Horus X10S Express radio now flashed with (Opentx v2.3.5) The ISRM-S-X10E version is 1.1.0/1.1.3FCC in ACCST D16 mode and with the external antenna selected I get an error mes…
-
Hey folks! First of all want to say thanks for all your effort and this outstanding project!
Coming from Germany and getting really pissed about the F---y policies I did flash my R9 Hardware over t…
-
I have a setup connected like this:
S.Port on the R9M module (or on the Horus itself, doesn't matter) -> inverter -> PC serial in
![Horus](https://user-images.githubusercontent.com/47420264/9952…
-
Im not a developer but a user of express lrs r9m modules was wondering if mpm can implement express lrs for the 900mhz capable 5in1 modules used in the jumper t18
-
Lua script for Express LRS seems to have some problem. Radio link goes out if you set the Pkt. Rate anything other than 200 Hz. I tested with the latest lua released on 29/11/2020. I tried various pow…
-
Im going to build my receiver using the TTGO LORA32 V2.0, how does this can be compared with the range of Frsky RM9 module? Am I going to get same strenght of signal for long range as in RM9 module? A…