-
Using `Detect` and running a very basic program on the Raspberry Pi 3, will result in the whole Raspberry Pi locking up (and needing a forced restart).
This only happens on a pin with very many rises…
-
Status on the FSK Project
Backlog
[x] Addition of FSK device decoders to the build
[x] Update build process to allow refreshes of rtl_433 components
[x] Wire FSK device decoders into rtl_433_E…
-
I have a 12 zone underfloor heating system with wireless thermostats which each have a wheel for setting temperature and a thermistor for sensing the current temp. [MASTER-RAIL NY.PDF](https://github.…
-
I don't think is is really a problem with rtl_433 and it may be a bit out of scope so but I thought that perhaps I could tap your vast knowledge on this subject to suggest what the problem is that I a…
-
Hi there !
We are trying to acquire a signal at a different frequency than the drive, and to demodulate it with coherent phase. To do this we need seperate generators for the DAC and the ADC, and t…
-
Dear Maxim,
I have just simply changed an RF raster time from 1 us (default) to 2 us in Siemens.
However, an RF raster time of 2 us gave a noiselike image while an RF raster time of 1 us gives a…
-
Thanks for this work Sloopdog! I'm having trouble with my thermostat. It's very sensitive to RF (ham radio) and I want to replace the thermostat with an analog version. (not a NEST).
Have you figur…
-
#### Description
In the CC2538 RF initialization (`cc2538_init()` in `cpu/cc2538/radio/cc2538_rf.c`) the function uses some of the pins in order to observe the state of signals. For this it dif…
-
As reported by @askn37, there is an issue with programming NVM V3+ chips when the boot operation is not fully completed. This results in NVM controller not accepting `NVMProg` key and can cause progra…
-
Hi,
I've been having a problem adding rf blocks with different phase modulation to my sequence. I can add the first couple of pulses, but after that I see repeated shapes when I plot the sequence. …