-
Using an RS-485 Transceiver with automatic flow control (MAX22028) and also tried with THVD-2410 (flow control pin).
THVD-2410 works with the flow control code, but when I try to use a transceiver wi…
-
When trying to do some (debug) logging over syslog I ran into issues CYW43 SoC (or driver?) apparently crashing.
Symptoms "[CYW43] Bus error condition detected" error messages flooding console output…
-
Writing a DaLI data loader plugin has high impact on the functionality and usefulness of both [DaLI](https://github.com/eprbell/dali-rp2) and [RP2](https://github.com/eprbell/rp2). Data loader plugins…
-
https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/discussions/33
-
These should really be set in the board definition file, so other board variants can use other pins.
https://github.com/raspberrypi/pico-sdk/blob/efe2103f9b28458a1615ff096054479743ade236/src/rp2_co…
-
Once the CCXT plugin is up and running it would be useful to be able to have some kind of paper trail exist on how the price routing occurred.
For instance, how the CCXT converter plugin found the …
-
### Is your device already requested?
- [X] I have searched the existing issues
### Brand
Retroid
### Name
Retroid Pocket 2
### Device code
real6580_weg_m
### Model
RP2
### Device images
``…
-
### Operating System
Linux
### Board
Raspberry Pi PICO (RP2040)
### Firmware
https://github.com/byteit101/test-tinyusb-pico
### What happened ?
panic/assert/exit calls sometimes, …
-
Hi guys,
I'm trying to setup SysTick handler on a picow board. What I konw roughly is
1. Setup the SysTick by programming the syst_csr/syst_rvr registers
2. Setup the IRQ handler by calling irq_set…
-
These stem from my use of RMT for its original purpose. My "blaster" libraries for [433Mhz](https://github.com/peterhinch/micropython_remote) and [IR](https://github.com/peterhinch/micropython_ir) rem…