-
### Describe the bug
Using an ELP-USBFHD01M w/ OV2710 camera, v4l2jpegdec isn't sending anything downstream, terminal output stops at "Redistribute latency...". Using an "identity silent=false" befor…
-
After installing a full-upgrade as part of a maintenance, the display i used ./LCD35-Show for remains white. Reinstalling the driver wasn't helpful, but i know the display is likely to be healthy, the…
-
### Basic Infos
- [x] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [x] I have read the documentation at [readthedocs](https://arduin…
-
Many thanks for the awesome work on this project!!! FYI, I'm experiencing an issue with constant choppy sound using the UMC202HD USB device. Don't know if this is related to the issues with the Focusr…
-
### Describe the bug
Because of #4884 I switched to soft-i2c. On RPi3 it works stable. On RPi4 the clock does not work consistently. Here is an Osci Trace of this behavior.
It seems like the…
-
I have had at least two instances of Print Scheduler starting another print right after non-scheduled print completed.
Steps to reproduce.
1. Use "M80" G-code action to turn on the printer (it f…
-
**Describe the bug**
"Firmware transaction timeout" message and gst-launch hang on a Pi 4B 4GB when running `gst-launch-1.0 playbin uri=https://some.domain/720p25-h264-aac.m3u8`
**To reproduce**
…
-
Hi, I am trying to connect the pump board to the RPI through the RJ45 comm's jumper J2. I found the pin-outs for the pump [here:](https://cdn.sparkfun.com/datasheets/Widgets/Bartendro_Dispenser.pdf) a…
-
I needed to pull off the case. I was removing it quite gently with a spudger (aka black tip) when that piece of the case cracked. I have never seen such a brittle piece of plastic!
-
I have some ideas to improve your great project.
1. setting a time slot to display headlines only during a certain time frame.
2. a clock only time frame with no other scrolling.
3. weather forec…