-
This is to implement the reverse flow where SDRdaemon takes incoming UDP packets to feed a transmission device.
The transmission devices support should include as a priority the Raspberry Pi used a…
f4exb updated
7 years ago
-
It's possible to implement DAB on RPi using the hack of GPIO?
-
Hi, how can i use setTime.py ?
I'm using rpitx, and found this fork utility...can you explain how to set time (for example) one year in the future?
Many thanks
Michele
PS: If you want, you can write…
-
I am trying to figure out why rpitx, which does some serious GPIO "bitbanging"-type stuff, is glitching out on my Raspberry Pi 3: https://github.com/F5OEO/rpitx/issues/29
The recommendation for these…
-
fix output file to match sample in upstream
-
Hello,
Thank you for your efforts in making this whole project work.
The issue I am currently having when using it in IQ mode, I can not set my Symbol Rate above 1495, when I do the I and Q Signals st…
-
Hi,
i just tried to replace my old Raspberry Pi 1B with my new Pi3 but it seems that Pi-Blaster is not working with Pi3.
Installation worked fine but when trying to set a Pin to 1 nothing happens on…
-
Add Debian package and PPA for x86 and ARM.
-
The Raspberry Pi changed how the DMA is initialized. This should detect if it's being run on a Pi 2 and use the new DMA. In the short term, it should detect if it's running on a Pi 2, issue an error, …
-
rpitx (http://hackaday.com/2015/11/04/rpitx-turns-rasberry-pi-into-versatile-radio-transmitter/) is using DMA and access to GPIO and clock registers.
My config.txt
disable_l2cache=1
disable_pvt=1
fo…
F5OEO updated
8 years ago